Factory-direct thermal-break windows, heavy-duty bi-fold doors, hurricane-rated casements, and structural access hatches manufactured under strict ISO 9001:2015 quality standards.
In contemporary Jordanian architectural engineering—spanning commercial plazas in Amman, luxury residential estates in Abdoun, industrial facilities in Zarqa, and resort complexes along the Dead Sea and Aqaba—the procurement of exterior structural openings demands rigorous material performance. **Aluminum bulkhead doors and heavy-duty subterranean access systems** play a critical role in preserving structural envelope integrity, mitigating extreme ambient thermal transfer, and preventing moisture and particulate ingress under severe Middle Eastern climatic conditions.
As a premier global manufacturer operating out of a specialized 20,000 m² production facility since 1995, Al-Noor Aluminum Windows & Doors Industries LLC engineers custom thermal-break profiles, high-load structural aluminum access doors, and high-performance glazed openings engineered precisely to structural CAD/BIM specifications. Unlike standard mild-steel hatch doors susceptible to rapid atmospheric oxidation under saline coastal air or thermal expansion under intense solar radiation, extruded structural aluminum profiles (6063-T5 / 6061-T6) offer superior strength-to-weight ratios, structural longevity, and complete resistance to chemical degradation.
Detailed physical, mechanical, and thermal performance parameters evaluated under global laboratory standards (EN 14351-1, NFRC, ASTM E283/E330/E331).
| Performance Standard / Specification | Al-Noor Heavy-Duty Aluminum Bulkhead Systems | Standard Commercial Steel Access Hatches | Jordanian Code Compliance Target |
|---|---|---|---|
| Profile Alloy & Temper | Extruded Architectural Aluminum 6063-T5 / 6061-T6 | Cold-Rolled Carbon Steel (DC01 / Q235) | Structural Grade |
| Thermal Insulation (U-Factor) | U-value: 1.4 – 1.8 W/m²K (PA66-GF25 Thermal Break) | U-value: 3.8 – 5.2 W/m²K (Uninsulated frame) | JNBC Energy Code ≤ 2.1 W/m²K |
| Saline & Atmospheric Corrosion | Qualicoat Class 2 Powder / 25µm Marine Anodization | Standard Primer Paint (Prone to rust at joints) | Aqaba Coastal Marine Grade |
| Water Ingress Resistance | Class 9A (600 Pa) Triple-Gasket EPDM Continuous Seal | Class 3A (150 Pa) Single Strip Seal | ASTM E331 Waterproofing Standard |
| Structural Wind Load Resistance | Class C5 / E3300 (Design Load ± 3.3 kPa) | Class C3 (Design Load ± 2.0 kPa) | High Wind Zone (Amman Hills) |
| Hardware & Counterbalance | 316 Stainless Steel Gas Struts + Multi-point Latching | Standard Steel Springs & Torsional Rods | 100,000 Operation Cycles |
Custom engineered to overcome specific geographical, environmental, and micro-climate challenges encountered by Jordanian specifiers and MEP contractors.
In high-density luxury residential zones such as Abdoun, Dabouq, and Khalda, multi-story villas require subterranean utility room protection, wine cellars, and basement bulkhead access. Our flush-mounted aluminum bulkhead doors maintain sleek architectural aesthetic lines while insulating lower levels from severe winter cold snaps in the Amman highlands.
Operating at 430 meters below sea level, hospitality projects along the Dead Sea coast endure intense solar radiation, extreme heat (>45°C), and high atmospheric mineral salinity. Our heavy-duty bulkhead doors utilize PVDF fluorocarbon 3-coat finishes and high-grade thermal breaks to prevent seal degradation and structural warpage.
The Aqaba Special Economic Zone (ASEZA) demands marine-grade bulkhead hatches for logistics hubs, desalination pump stations, and port infrastructure. Fabricated with 316-grade stainless steel hardware and anti-corrosive anodized aluminum profiles, these doors withstand salt spray and heavy pedestrian/equipment traffic.
Substation utility vaults, remote telecom shelters, and solar farm control hubs across Jordan's eastern desert require dust-proof (IP65/IP66 rated) aluminum hatches. Dual perimeter EPDM seals prevent micro-fine sand infiltration during seasonal dust storms (Khamasin winds).
The Ministry of Public Works and Housing in Jordan has implemented mandatory thermal transmittance thresholds for new commercial and residential envelopes. Engineers are systematically replacing uninsulated steel bulkhead access doors with high-performance thermal break aluminum systems (featuring PA66 polyamide isolators) to prevent thermal bridging and pass building commissioning audits seamlessly.
Recent urban development patterns in Amman have highlighted the necessity of flood-resilient subterranean entryways. Custom aluminum bulkhead doors engineered with compression-molded gas struts and hydrostatic inflatable gasket options allow developers to safeguard high-value mechanical/electrical basements against sudden heavy rainfall run-off during winter storms.
With nearly three decades of direct factory manufacturing expertise, Al-Noor integrates architectural drafting, CNC machining, automated extrusion coating, and lab testing under one quality-controlled umbrella.
Send architectural DWG/PDF drawings and receive marked-up engineering shop drawings with exact thermal calculations and hardware layouts within 24 hours.
Equipped with high-precision double-head cutting saws, CNC milling centers, and automatic corner-crimping machinery to ensure zero-tolerance joint assembly.
Full test reports available for CE Marking (EN 14351-1), NFRC energy ratings, CSA A440 structural standards, AS 2047, and ISO 9001:2015 quality management systems.
Each door unit is protective foam-wrapped, corner-shielded, and encased in ISPM-15 compliant sea-freight wooden crates labelled per site floor and elevation plan.
Extensive experience shipping via Aqaba Port and Amman Dry Port. Complete commercial invoice, Certificate of Origin (COO), and EUR.1 / Arab League paperwork preparation.
Direct technical answers regarding customs clearance, thermal specifications, sample confirmation, and freight logistics to Amman and Aqaba.
Yes. Every unit manufactured in our 20,000 m² factory is built to bespoke dimensions on our specialized TY120, TY150, and PRO110 profile systems. Our structural engineering team analyzes your CAD drawings, returns fully marked-up shop drawings within 24 hours, and zero profiles are cut until you approve the drawing markups and material samples.
Standard fabrication turnaround is typically 15 to 25 business days depending on custom powder-coat finishing specifications. Direct ocean container freight to Aqaba Port (Port of Aqaba) takes approximately 18 to 24 transit days. From Aqaba, overland trucking to Amman, Zarqa, or Irbid takes 1 to 2 days under standard customs clearance procedures.
Our thermal-break bulkhead doors utilize high-grade Polyamide PA66-GF25 structural insulation strips inserted between outer and inner aluminum profile chambers. Combined with Low-E double-glazed panels or insulated aluminum sandwich infills, our doors prevent thermal bridging, withstand exterior surface temperatures exceeding 70°C without warping, and maintain mechanical functionality year-round.
We provide full laboratory test packages including ISO 9001:2015 Quality Management System certificates, CE Marking (EN 14351-1), NFRC energy rating reports, CSA certification, AS 2047 test data, and Intertek third-party structural wind/water penetration compliance documents tailored for consultant submittals.
All finished frames and sashes undergo a multi-layer packaging protocol: 1) Protective PE anti-scratch film on aluminum profiles, 2) Impact-absorbing foam corner caps, 3) Moisture-barrier bubble wrapping, and 4) Fully enclosed ISPM-15 fumigated wooden crates. Crates are loaded onto container floors according to a predetermined site unboxing sequence.