Custom aluminum sliding doors and panoramic windows installed in a private residence
Finished villa with floor-to-ceiling aluminum glazing
Resort at dusk fitted with aluminum sliding doors and windows
Factory-Direct Manufacturer Since 1995

Custom Aluminum Windows & Doors

Thermal-break systems built to your drawings, matched to your climate, shipped to 60+ countries.

  • CE EN 14351-1
  • CSA Certified
  • ISO 9001:2015
1995

Year Founded

120+

Projects Delivered

60+

Export Markets

20,000m²

Factory Floor Area

Who We Build For

Aluminum Glazing Programs for Every Type of Buyer

Private owners, hotel groups, contractors and dealers buy differently. Our engineering, batching and packing are organised around how you build.

Private villa with aluminum sliding doors and panoramic windows

Villas & Private Homes

Floor-to-ceiling sliding doors, panoramic windows and skylights for private residences, measured, made and shipped for your build.

  • Units built to your architect's sizes
  • Crates labelled by room
See Villa Solutions
Resort fitted with aluminum doors and windows

Hotels & Resorts

Repeat room types made in one batch, one specification on every floor, and phased deliveries matched to your fit-out programme.

  • Batch consistency across room types
  • Phased container loading
See Hotel Solutions
Commercial office building with aluminum façade glazing

Commercial Projects

Send façade drawings and receive a marked-up set back within 24 hours. Nothing is cut until you sign off the shop drawings.

  • 24-hour drawing mark-up
  • Shop-drawing sign-off before cutting
See Commercial Solutions
Distributors visiting the aluminum window factory

Dealers & Distributors

Private-label programmes, a sample box before your first order, and a territory check within five working days.

  • Private-label options
  • Sample box before first order
Talk to Our Team
Projects & Climate Matching

Aluminum Windows and Doors Specified for Each Climate

The right system depends on wind, rain, heat and fire risk at your site. Here is how we specify for four common climate zones, including two delivered projects.

View All Projects
Project · Sherman Oaks, California
Hillside residence in California with aluminum sliding doors for wildfire country
Project · Botolan, Zambales, Philippines
Coastal villa in the Philippines with typhoon-rated aluminum glazing
Specification Guide · Hot & Arid
Resort glazing specified for high heat and solar gain
Specification Guide · Cold & Snow
Residence glazing specified for cold winters
Sherman Oaks, California · Private Residence

Hillside Glazing for Wildfire Country

Climate
Wildfire hazard zone, intense sun, wide day-night temperature swing
Systems
TY120 and TY150 sliding, PRO110 casement and fixed
Glazing
Tempered insulated glass throughout
Scope
Multi-panel sliding doors, fixed lights, hinged entrance door

Non-combustible aluminum frames with dual-pane tempered glass are a common route to meet California's wildland-urban interface (Chapter 7A) glazing requirements. Confirm with your local building official.

Botolan, Zambales, Philippines · Private Villa

Typhoon Glazing for a Coastal Villa

Climate
Severe typhoons, driving rain, salt-laden air
Systems
PRO110 casement, TY120 sliding
Glazing
5 + 20A + 5 mm insulated glass
Scope
Casement windows, sliding doors, fixed glazing

On exposed coasts, casements usually outperform sliders for water tightness because the sash compresses onto its gaskets. We pair them with corrosion-resistant hardware and finishes.

Gulf, Middle East & desert regions

Solar Control for Extreme Heat

Climate
High solar load, dust and sand, large daily temperature range
Systems
Thermal-break casement and heavy-duty sliding systems
Glazing
Low-E solar-control insulated glass to cut heat gain
Key checks
Sill drainage, dust-resistant tracks and seals, UV-stable finishes

A low solar heat gain coefficient (SHGC) matters more than U-value in hot climates. Ask us for glass options with the SHGC your energy consultant targets.

North America, Northern Europe & alpine regions

Thermal Performance for Cold Winters

Climate
Sub-zero temperatures, snow load, condensation risk
Systems
TY150 and PRO110 thermal-break profiles
Glazing
Low-E insulated glass with warm-edge spacers
Key checks
NFRC U-factor, NAFS/CSA A440 air and water ratings

In cold climates the thermal break and spacer choice decide whether frames stay above dew point. Send your target U-factor and we will match the system.

Get a Climate Specification
How It Works

Ordering Custom Aluminum Windows and Doors in Five Steps

Drawings reviewed within 24 hours. Nothing goes into production until you approve the sample.

  1. 01

    Requirement Analysis

    We read your drawings and flag anything the climate, code or site won't allow.

  2. 02

    Design & Specification

    You receive shop drawings and an itemised, unit-by-unit specification within 24 hours.

  3. 03

    Sample Confirmation

    You approve a physical sample before we cut a single profile.

  4. 04

    Production & QC

    Cutting, CNC machining, assembly and glazing in-house, with every unit checked before packing.

  5. 05

    Packing & Shipping

    Frames wrapped, corners protected, crates marked for your site and loaded for sea freight.

Factory & Certifications

Built In-House, Tested to NFRC, CSA and AS 2047

From bare profile to crated unit, every step happens under one roof in our 20,000 m² factory, so the performance you approve is the performance you install.

Aluminum window and door factory production floor and export loading

In-House Fabrication

Cutting, CNC machining, assembly and glazing under one roof.

Unit-by-Unit QC

Glass, hardware, operation and seals checked before packing.

Export Packing

Foam wrap, corner guards and wooden crates loaded to your site plan.

60+ Export Markets

Documentation prepared for destination codes and customs.

NFRC

Energy Performance Ratings

U-factor, SHGC and visible transmittance ratings recognised by US energy codes.

NAFS / CSA A440

North American Performance

Air leakage, water penetration and structural test reports for the US and Canada.

AS 2047

Australian Window Standard

Documentation for wind load, water resistance and operation in Australian projects.

CE · EN 14351-1

European Product Standard

CE marking for windows and external pedestrian doors sold in the EU.

ISO 9001:2015

Quality Management System

Documented control of materials, production and inspection.

Intertek

Third-Party Test Reports

Independent laboratory reports available for selected systems.

Need the full PDFs? Test scope varies by system. Tell us your market and we will send the reports that apply to your product.

Client Feedback

What Project Owners Say After Installation

Feedback from developers and homeowners who ordered custom aluminum windows and doors from our factory.

"Custom sizes, tropical-climate glazing, delivered on time and exactly as specified. Every room type matched from the first floor to the last."
Custom SizeTropical Climate Solutions
RD
Resort DeveloperSoutheast Asia
"Their shop drawings caught opening conflicts before anything was cut, and every crate arrived labelled by elevation. Our installer had the doors running the same week."
Custom SizeWildfire Zone Glazing
PR
Private ResidenceCalifornia, United States
Buyer FAQ

Questions Overseas Buyers Ask Before Ordering

Straight answers about drawings, testing, climate specification and export packing. Anything else, write to [email protected].

Can you manufacture to my architectural drawings?

Yes. Every unit is built to size on our TY120, TY150 and PRO110 thermal-break systems. We return marked-up shop drawings within 24 hours, and nothing is cut until you sign them off and approve the sample.

Which certifications and test reports can you provide?

Depending on the system: NFRC ratings, NAFS/CSA A440 test reports, AS 2047 documentation, CE marking to EN 14351-1 and Intertek reports. Our quality system is ISO 9001:2015. We send the PDFs that apply to your market.

How do you choose glass for my climate?

We start from wind, rain, heat and fire exposure at your site. Typical examples: 5+20A+5 mm insulated glass with casements on typhoon coasts, tempered insulated glass in wildfire zones, and Low-E solar-control units in hot, high-sun regions.

How are windows and doors packed for sea freight?

Frames are foam-wrapped, corners protected and units crated in wooden cases marked by room or elevation, then loaded to a plan that matches your installation sequence.

Do you supply hotels, contractors and dealers?

Yes. We batch repeat room types for hotels and resorts, work from façade drawings for commercial contractors, and offer private-label programmes with sample boxes for dealers and distributors.

Get Started

Ready to Specify Your Windows and Doors?

Send your drawings or specifications and our engineers will reply within 24 hours with a system and glazing recommendation. No account, no obligation.