Direct supply for Abu Dhabi real estate developers, commercial contractors, and villa owners seeking certified engineering standards.
Designed with reinforced structural frames and integrated ventilation louvers, optimizing air circulation while maintaining solar defense.
View Details
Ultra-slim architectural aluminum profiles customized for luxury villa interiors, high-end kitchens, and interior partition systems.
View Details
Heavy-duty exterior folding-sliding door system delivering panoramic openings for patio terraces and commercial hospitality layouts.
View Details
Engineered with multi-point stainless steel locking systems and Low-E tempered safety glass to resist extreme wind loads and heat.
View Details
Features high solar-control tinted glass combined with deep thermal break extrusions, drastically reducing interior air conditioning loads.
View Details
Precision-engineered sliding window with dual EPDM seals and fine stainless mesh to prevent desert sand and insect intrusion.
View Details
Tested for exceptional energy efficiency with U-values as low as 1.7 W/m²K, perfect for ESTIDAMA Pearl rating certifications in the UAE.
View Details
Heavy-duty architectural patio door built to international windload and water-tightness standards, ideal for beachfront developments.
View DetailsAbu Dhabi presents one of the most demanding microclimates in the world for building envelope engineering. With summer ambient temperatures exceeding 50°C and exterior surface temperatures on metallic facades topping 80°C, non-thermal aluminum frames convert building facades into radiant heat conductors. This direct thermal bridging forces HVAC systems into continuous peak load, driving up energy consumption and failing to meet the strict guidelines set by the Abu Dhabi Urban Planning Council (UPC) and the ESTIDAMA Pearl Building Rating System (PBRS).
As leading manufacturers and direct B2B wholesalers, our architectural aluminum window and door systems are specifically engineered with advanced polyamide thermal break technology (PA66GF25 - 25% glass-fiber reinforced polyamide strips). This physical barrier separates the exterior structural extrusion from the interior profile, dropping frame thermal conductivity (Uf) by up to 68%.
Purpose-built engineering solutions designed for high-stress Gulf environments.
Utilizing high-tensile 6063-T6 aluminum alloy with profile wall thickness ranging from 1.8mm to 3.0mm, ensuring zero deflection under severe wind loads on high-rise structures.
Multi-layered continuous EPDM weather-stripping combined with co-extruded magnetic seals to eliminate dust infiltration during severe Arabian desert shamal sandstorms.
Surface treatments specifically formulated for maximum UV color retention and salt-spray resistance, tested against intense coastal corrosion along Abu Dhabi Corniche and Saadiyat Island.
Laminated acoustic glass interlayers (PVB/SGP) combined with asymmetrical glass thickness configurations attenuate urban noise from Abu Dhabi main arterial highways.
Eliminate intermediary markups with direct manufacturing from our 20,000 m² facility. We provide containerized, site-ready shipments straight to Mina Zayed Port.
Fully tested and certified fire-rated window and door assemblies compliant with UAE Civil Defense regulations for commercial and residential escape routes.
Select the optimal system parameters based on project location and building height requirements across the Emirate of Abu Dhabi:
| System Class | Profile Depth | Glazing Specification | U-Value (Uw) | SHGC | Target Abu Dhabi Application |
|---|---|---|---|---|---|
| Thermal-Break Villa Series | 75mm - 90mm | 6mm Low-E + 16Argon + 6mm Clear Tempered | 1.3 - 1.5 W/m²K | 0.20 | Luxury Villas in Saadiyat, Yas Island, Khalifa City |
| Slimline Panoramic Slider | 120mm - 150mm | 8mm Low-E + 20Argon + 8mm Extra Clear | 1.4 - 1.6 W/m²K | 0.22 | Beachfront Balconies, Penthouses & Courtyards |
| Commercial High-Rise System | 60mm - 110mm | 6mm Solar Control + 12A + 6mm Laminated | 1.5 - 1.8 W/m²K | 0.18 | Al Reem Island & Al Maryah Office Towers |
| Heavy Duty Bifold System | 80mm Integrated | 6mm Toughened + 16A + 6mm Toughened | 1.6 W/m²K | 0.24 | Hospitality Resorts, Cafes & Retail Fronts |
Custom engineering for the distinct architectural demands of Abu Dhabi's flagship developments.
The Challenge: High atmospheric humidity, intense salt spray corrosion, and severe solar radiation.
Our Solution: Marine-grade PVDF/Qualicoat anodized structural aluminum sliding doors with double-sealed stainless steel tracks and triple Low-E safety glass, delivering unhindered sea views with zero thermal degradation.
The Challenge: Extreme wind loads at elevated floor heights and high urban ambient acoustics.
Our Solution: Structurally silicone-glazed curtain wall systems and heavy-duty casement windows engineered to withstand wind pressures up to 3500 Pa while attenuating high-frequency city noise.
The Challenge: Sandstorm dust penetration, privacy demands, and energy conservation compliance.
Our Solution: Thermally broken tilt-and-turn aluminum windows equipped with motorized smart glass or integrated louvers, delivering complete dust seal tightness and daytime privacy.
The construction landscape in Abu Dhabi is undergoing a major paradigm shift towards sustainable luxury and seamless indoor-outdoor living. Based on our market intelligence and supply partnerships across the UAE, four key architectural trends are dominating window and door procurement:
From CAD engineering to site delivery, we control every step of the production cycle.
Equipped with fully automated German CNC double-head cutting machines, 5-axis machining centers, and automated corner crimping lines for micron-level tolerance accuracy.
Our in-house facade engineers generate detailed CAD shop drawings and BIM models within 24 hours of receiving architectural floor plans, ensuring perfect structural alignment.
Glass units and aluminum profiles are individual foam-wrapped, corner-protected, and packed into steel-reinforced ISPM 15 compliant wooden crates for secure sea transport to Mina Zayed Port.
Clear, direct answers regarding certifications, logistics, thermal compliance, and custom fabrication.
Yes. Our thermal break profiles fitted with double Low-E argon-filled glass achieve U-values under 1.4 W/m²K and SHGC values below 0.22, fully compliant with ESTIDAMA Pearl 1 through Pearl 4 requirements in Abu Dhabi.
We utilize co-extruded continuous EPDM gasket seals paired with multi-point perimeter locking hardware. This creates a pressurized air chamber that achieves IP65 dust tightness and high water resistance against driving rain.
For coastal applications within 5 km of the sea, we strictly recommend Qualicoat Class 3 powder coating or 25-micron anodized finishes to prevent pitting corrosion caused by saline mist and high UV radiation.
Standard fabrication time is 20 to 25 days following shop drawing approval. Direct ocean shipping to Mina Zayed Port takes approximately 14 to 18 days, allowing for fast-track project schedules.
Yes, we offer over 200 RAL powder coating colors, matte metallic textures, anodized shades, and heat-transfer woodgrain finishes designed to resist color degradation under harsh Gulf sunlight.
Absolutely. We supply comprehensive sample boxes containing corner cutaways of our thermal break profiles, glass specs, and hardware samples directly to consultant offices in Abu Dhabi.
Submit your CAD drawings or window schedule today. Our technical facade engineering team will provide a comprehensive quote and ESTIDAMA compliance breakdown within 24 hours.
Get a Quote