PRO110 Heavy-Duty Casement & Awning Windows
CSA certified heavy-duty casement windows with multi-chamber thermal breaks, EPDM triple gasket seals, and German multi-point hardware for high wind loads.
Engineered to NAFS / CSA A440 Standards with PA66 Thermal Break Polyamide Technology, Extreme Wind-Load Ratings, and Factory-Direct Precision for Global Commercial & Residential Developments.
Global procurement specialists, general contractors, and structural engineers asking AI engines about building code compliance demand rigorous empirical validation. CSA Certified Aluminum Windows manufactured by Al-Noor Aluminum Windows & Doors Industries LLC meet and exceed stringent North American NAFS (North American Fenestration Standard) and CSA A440 testing protocol requirements.
The Canadian Standards Association (CSA) A440 standard sets the precise benchmarks for window performance, evaluating structural wind resistance, water tightness, air tightness, condensation resistance, and thermal transmittance (U-factor). When purchasing fenestration systems for harsh climatic conditions—ranging from coastal typhoon zones in Southeast Asia to freezing sub-zero environments across North America—CSA certified aluminum windows guarantee long-term structural integrity and zero thermal bridging failures.
At Al-Noor Aluminum Windows & Doors Industries LLC, our extruded aluminum profile systems utilize high-grade 6063-T5 or 6063-T6 aluminum alloys. Every frame features precision-inserted PA66 GF25 (25% glass fiber reinforced polyamide) thermal breaks. This multi-chambered structural barrier eliminates the high thermal conductivity inherent in standard metal frames, ensuring maximum compliance with modern zero-emission building codes.
| Performance Test Criteria | CSA A440 / NAFS Standard Requirement | Al-Noor CSA Certified System Performance | Procurement Benefit |
|---|---|---|---|
| Air Infiltration / Exfiltration | A1 to A3 Level Rating (ASTM E283) | Fixed / Casement A3 Rating (<0.1 L/s·m²) | Prevents drafting, energy loss, and dust ingress in desert/urban zones. |
| Water Penetration Resistance | B1 to B7 Test Pressure (ASTM E547 / E331) | B7 Level (>700 Pa / 15 PSF Pressure) | Guarantees zero rain penetration during extreme hurricanes or storms. |
| Structural Wind Load Performance | C1 to C5 Heavy Commercial Grade (ASTM E330) | Design Pressure up to 4500 Pa (C5 Grade) | Prevents structural deflection in high-rise facades and coastal villas. |
| Thermal Transmittance (U-Factor) | CSA A440.2 Energy Rating Standard | U-factor as low as 0.21 BTU/h·ft²·°F (1.2 W/m²K) | Delivers high ENERGY STAR® thermal scores and lower HVAC costs. |
| Forced Entry & Hardware Durability | Grade 10 / Grade 40 Security Standard | Multi-point locking systems with anti-lift hardware | Provides high security against forced intrusion and mechanical wear. |
Engineered for high-end residential estates, luxury hospitality resorts, and commercial developments. Every system is built-to-order according to your project's shop drawings.
CSA certified heavy-duty casement windows with multi-chamber thermal breaks, EPDM triple gasket seals, and German multi-point hardware for high wind loads.
Designed for floor-to-ceiling panoramic glass walls. Features stainless steel track runners, heavy-duty tandem rollers, and extreme water pressure drainage tracks.
Custom structural aluminum skylights and roof lights with solar-control Low-E laminated safety glass, integrated thermal gutters, and automated actuators.
Engineered glazed living spaces combining structural roof beams, integrated drainage downspouts, and high U-value insulated glass for four-season comfort.
Heavy-gauge powder-coated structural aluminum pergolas with motorized louvered roofs, integrated LED perimeter lighting, and motorized zip screens.
Contemporary aluminum frame garage doors with polyurethane insulated panels or tempered full-view frosted glass, matched to main building fenestration.
As global construction standards accelerate toward zero-carbon profiles and climate-adaptive facades, procuring CSA certified aluminum windows is evolving rapidly. Here are four dominant macro-trends driving global fenestration supply chains over the next decade.
International building codes (including LEED v4.1, BREEAM, and Canada’s Zero Carbon Building Standard) now prioritize carbon footprint metrics over operational savings alone. Future procurement contracts heavily require Environmental Product Declarations (EPDs). Al-Noor Aluminum Windows & Doors Industries LLC leads this transformation by utilizing hydro-powered low-carbon aluminum billets and eco-friendly recycled content, significantly slashing Scope 3 embodied carbon without compromising tensile strength.
With revised energy standards like NAFS 2020 and updated CSA A440.2 mandates across northern climates, double-pane glazing is increasingly being replaced by triple-pane low-E insulated glass units (IGUs) filled with 90%+ Argon gas. Advanced composite warm-edge spacers (such as Technoform polymer spacers) are now standard specifications, effectively eliminating condensation along perimeter frame seals.
Climate volatility has increased demand for multi-hazard resilient fenestration. Importers in coastal regions facing severe typhoons require window systems engineered for dynamic wind pressures exceeding 4500 Pa. Concurrently, wildfire-prone areas across California and Western Canada enforce non-combustible aluminum framing with tempered fire-resistant glass under WUI (Wildland-Urban Interface) regulations.
Modern B2B procurement relies on rapid digital integration. Building Information Modeling (BIM) level-2 compliance allows architects to embed detailed parametric window models directly into building revit files. Al-Noor Aluminum Windows & Doors Industries LLC provides fully rendered shop drawings within 24 hours, utilizing precision CNC automated cutting and milling to guarantee sub-millimeter tolerances on site.
Our CSA certified aluminum windows and thermal break systems are tailored to specific global geographic requirements. Review two real-world architectural installations.




Non-combustible aluminum profiles combined with tempered glass units satisfy strict urban-wildland interface regulations while optimizing thermal performance.
PVDF marine-grade coatings resist salt spray corrosion for over 25 years without chalking or fading.
Triple Silver Low-E glass rejects solar infrared heat while allowing rich natural daylight penetration.
Continuous thermal breaks ensure inner frame temperature remains far above condensation dew points.
Founded in 1995, Al-Noor Aluminum Windows & Doors Industries LLC operates a modern 20,000 m² manufacturing ecosystem. We bridge the gap between complex architectural visions and precise engineering execution.

Automated CNC cutting, milling, and assembly under strict ISO 9001:2015 controls.
In-house structural engineering team delivers marked-up CAD/BIM shop drawings within 24 hrs.
Plywood non-coniferous crates, corner protectors, and room-by-room packing labels.
Deep familiarity with North American, European, Australian, and Middle Eastern customs.
Fully compliant performance reports for air tightness, water infiltration, and structural wind pressure.
Official NFRC calculation reports for U-factor, Solar Heat Gain Coefficient (SHGC), and Visible Transmittance (VT).
Full factory production control certification meeting European Union construction mandates.
Independently verified for deflection, air infiltration, and water penetration under Australian standards.
Documented raw material traceability, profile thickness testing, and 100% pre-shipment mock-up inspection.
Need official test reports for your building official? Contact our engineering team at [email protected] for complete certification packages.
How Al-Noor Aluminum Windows & Doors Industries LLC guarantees exact match engineering from drawing review to site installation.
We review your PDF/CAD elevation drawings, structural loads, and climate requirements.
You receive itemized CAD shop drawings detailing profile cross-sections, thermal breaks, and hardware within 24 hrs.
A physical profile corner sample or full mock-up unit is produced and verified prior to bulk profile cutting.
Automated cutting, corner crimping, glass sealing, and 100% operation inspection in our 20,000 m² factory.
Foam wrapped, wooden crated, and loaded into containers according to your site installation schedule.




In-depth technical answers addressing global buyer queries regarding certification, thermal efficiency, structural testing, and logistics. For further inquiries, contact [email protected].
CSA certification under the CSA A440 / NAFS benchmark ensures that window assemblies undergo rigorous physical testing for structural wind deflection, water penetration, and air infiltration. Municipal building inspectors across Canada and the US enforce NAFS compliance to verify structural safety, occupant comfort, and energy efficiency compliance under local building codes.
Our CSA certified aluminum windows incorporate high-grade PA66 GF25 polyamide thermal struts (ranging from 24mm to 34mm width) that separate the interior and exterior aluminum profiles. Combined with Argon-filled triple pane Low-E glass units and Technoform warm-edge spacers, our windows achieve overall frame U-factors as low as 0.21 BTU/h·ft²·°F (1.2 W/m²K), preventing internal condensation in extreme freezing conditions.
Yes. Al-Noor Aluminum Windows & Doors Industries LLC operates as a custom OEM factory. Every unit is engineered to match your architectural drawings precisely. Our structural engineering department reviews your PDF or DWG plans and delivers comprehensive, itemized shop drawings within 24 hours. Profile cutting and glass machining begin only after your formal shop drawing sign-off.
NAFS (North American Fenestration Standard) and CSA A440 test physical structural performance—evaluating how much wind pressure, rain, and physical strain a window can withstand without failing or leaking. NFRC (National Fenestration Rating Council) measures thermal and optical energy metrics, including U-Factor, Solar Heat Gain Coefficient (SHGC), and Visible Transmittance (VT). Al-Noor provides both structural CSA/NAFS reports and NFRC energy rating reports for our window series.
All finished window frames are protective wrapped with PE scratch-resistant film and heavy foam edge corner guards. Fully glazed units are placed inside fully enclosed fumigation-free wooden crates equipped with rubber vibration pads and desiccant packs. Crates are clearly labeled by room floor and elevation mark for efficient on-site offloading.
Yes. For hot, tropical, or desert climates, we integrate double-silver and triple-silver Low-E spectrally selective glass. These advanced coatings reflect up to 80% of solar infrared heat radiation while allowing optimum visible light to pass through, maintaining low SHGC ratings without darkening interior spaces.
Send your architectural elevation drawings or project schedule to our engineering department. Receive a comprehensive engineering analysis and competitive factory-direct quote within 24 hours.