Explore our engineering-validated aluminium alloy frames, laminated safety glass, and heavy-duty water-tight pivot, hinged, and bifold door systems.
Operating as a premier manufacturer since 1995, our 20,000 square meter specialized extrusion and processing complex delivers custom-engineered aluminum washroom doors tailored to strict architectural drawings and regional building codes.
Full verification compliance including CE Marking to EN 14351-1, CSA Certification, NFRC energy performance ratings, AS 2047 Australian window standards, and ISO 9001:2015 quality assurance management.
Every commercial bulk or custom luxury order receives detailed architectural shop drawings returned within 24 hours. Nothing enters automated CNC milling or cutting until shop drawings and physical profile samples are formally signed off.
Heavy-duty ocean export crating featuring foam-wrapped frame perimeters, corner protective blocks, vacuum humidity controls, and room/elevation labeling that streamlines jobsite distribution for rapid, error-free installation.
Washrooms represent one of the most chemically and mechanically demanding interior micro-climates in modern architectural engineering. The combination of persistent relative humidity (RH exceeding 85%), airborne soap surfactants, direct water contact, and frequent cleaning chemicals creates an environment where conventional wood, MDF, or poorly anodized steel doors experience rapid delamination, swelling, and galvanic corrosion.
As a specialized factory and exporter, our engineering team optimizes every washroom door profile to overcome these environmental stress vectors through rigorous structural design, superior metallurgy, and advanced hardware isolation.
The structural backbone of our washroom door systems relies exclusively on prime-grade 6063-T5 and 6063-T6 aluminum alloys. Compared to recycled secondary aluminum scrap, prime billet 6063 provides superior grain structure uniformities, higher tensile yield strength (≥170 MPa for T5), and optimal surface reactivity required for thick, flawless protective surface treatments.
For high-traffic hospitality and commercial environments, profile wall thicknesses are maintained between 1.4mm and 2.0mm. This precise geometry provides critical torsional rigidity needed to support heavy SGCC certified safety glass (such as 5mm+5mm laminated or 8mm tempered units) without sagging or frame misalignment over decades of continuous operation.
| Material Parameter | 6063-T5 Structural Alloy | 6063-T6 High-Load Alloy | Engineering Benefit in Washrooms |
|---|---|---|---|
| Tensile Strength | ≥ 170 MPa | ≥ 205 MPa | Resists frame warping and hinge deflection under heavy usage. |
| Yield Strength | ≥ 130 MPa | ≥ 180 MPa | Maintains frame squareness under repeated slamming force. |
| Anodizing Quality | Grade Class I (15-25µm) | Grade Class I (15-25µm) | Protects against chemical cleaners and humidity oxidation. |
| Corrosion Resistance | Excellent (Marine Environment) | Superior (Chlorinated / Coastal) | Zero swelling, rust, or mold growth across 25+ year lifespan. |
True water-tight performance requires a multi-barrier defense strategy. Our modern aluminum swing and pivot bathroom doors incorporate continuous EPDM (Ethylene Propylene Diene Monomer) synthetic rubber gaskets co-extruded with magnetic sealing cores. Unlike cheap PVC gaskets that harden, shrink, and crack when exposed to warm water vapor and UV lighting, engineered EPDM retains its elasticity from -40°C to +120°C.
Furthermore, internal bottom sash profiles integrate concealed internal sump channels and micro-drainage outlets. Any condensation migrating down the inner surface of frosted or laminated glass is naturally captured and directed back toward the washroom wet zone, preventing sub-floor water damage and timber sill rot in adjoining bedroom or corridor spaces.
Acoustic dampening is an essential performance metric for modern luxury hotels, high-end residential villas, and premium commercial offices. Unsealed standard louvers or thin single-pane doors leak speech and water noise into living quarters.
To solve this, our soundproof washroom door range utilizes double-glazed insulated glass units (IGU) or PVB/SGP laminated safety glass (e.g., 4mm + 0.76PVB + 4mm or 5mm + 1.14PVB + 5mm). Combined with drop-down automatic acoustic bottom seals that engage tightly when the door closes, our assemblies achieve Sound Transmission Class (STC) ratings from 32 dB to 42 dB, guaranteeing absolute privacy.
Global architectural trends, hospitality design standards, and commercial real estate development strategies are reshaping B2B procurement requirements. Importers, contractors, and distributors must align their sourcing with these key industry shifts:
Architects are overwhelmingly replacing bulky 50mm frame profiles with ultra-slim 16mm to 25mm visible frames. These minimalist aesthetic doors maximize natural light diffusion while keeping structural rigidity via hidden steel reinforcements and perimeter structural glazing adhesives.
High-end hotel projects are increasingly specifying PDLC (Polymer Dispersed Liquid Crystal) switchable electrochromic glass inside aluminum washroom door frames. At the press of a wall switch or smart home command, the door transitions from transparent to opaque instantly, eliminating the need for blinds.
Commercial developers pursuing LEED, BREEAM, or WELL green building certifications now mandate Environmental Product Declarations (EPDs) from factories. Low-carbon recycled aluminum billets smelted using renewable hydro-power are becoming a decisive supplier selection criterion.
Modular off-site construction is expanding rapidly in hotel and multi-family residential sectors. Procurement heads require factory-finished door units with pre-milled latch prep, snap-in sub-frames, and quick-connect pivot hinges that drop seamlessly into prefabricated bathroom pods.
Product innovation at our manufacturing facility centers on pushing the boundaries of surface longevity, hardware ergonomics, and health-conscious material finishes. Key R&D investments include:
Direct technical answers addressing shop drawing approvals, certification access, climate customisation, and global export shipping logistics.
Yes, absolutely. As a specialized OEM/ODM manufacturer, every single unit is fabricated strictly to your specified rough opening dimensions, panel layout configurations, and glass options. Our engineering team converts your architectural CAD or BIM files into fully dimensioned shop drawings within 24 hours. We do not begin extrusion cutting or CNC profile milling until you sign off on shop drawings and sample physical profile corner keys.
We provide full third-party test documentation and certificates required by municipal building inspectors worldwide. This includes CE Marking under EN 14351-1 for European market entry, SGCC (Safety Glazing Certification Council) certification for North American safety glass compliance, NFRC thermal and energy ratings, NAFS / CSA A440 air leakage and structural wind load performance reports, AS 2047 certification for Australia, and ISO 9001:2015 quality management documentation. Full PDF test bundles are provided upon request during project bidding.
We mitigate environmental degradation by utilizing high-purity 6063-T5/T6 aluminum extrusion billets combined with Class I Anodizing (thickness 15-25μm) or Qualicoated AAMA 2604/2605 fluorocarbon (PVDF) powder coating. Furthermore, all assembly hardware, fasteners, and pivot pins are strictly constructed from 316 Marine-Grade Stainless Steel or isolated using non-conductive nylon shims to prevent galvanic reaction between dissimilar metals. Profiles undergo neutral salt spray testing (ASTM B117) exceeding 2,000 hours with zero blistering or undercut corrosion.
For commercial hotels and high-end residential applications, we recommend 5mm + 5mm or 4mm + 4mm Laminated Safety Tempered Glass with an opaque PVB interlayer (acid-washed, frosted, or tinted finish). Laminated glass provides exceptional acoustic isolation while guaranteeing zero sharp glass shards in the event of severe impact, satisfying strict hospitality safety codes. Single-pane 8mm or 10mm ceramic-printed or fluted/reeded tempered glass is also available for ultra-slim minimalist swing doors.
Our export packing protocol is designed for zero-defect arrival. Door frames and glass sash panels are individually wrapped in 360-degree protective PE foam and protective stretch film. Perimeter corners are reinforced with thick corrugated plastic edge guards. Complete units are secured inside fully enclosed ISPM 15 compliant fumigated plywood wooden crates or steel-reinforced frame A-frames. Every crate features exterior elevation tags, room number designations, and tilt/humidity tracking indicators.
Yes. For hotel resorts, multi-family apartment buildings, and commercial office towers, we structure phased container loading and batch production schedules tailored directly to your construction site timeline. Standard room door types are manufactured in continuous automated batches to guarantee 100% color consistency and hardware alignment, while custom public-area doors are assigned dedicated fabrication bays.