"Our commercial resort required full AS 2047 compliance with strict water penetration ratings. Al-Noor provided complete AS 4420 test documentation upfront. Every container arrived indexed by room number, saving us hundreds of site installation hours."
AS 2047 Compliant Aluminum Glazing & Engineering Solutions
How do international procurement teams ensure zero-failure glazing under extreme structural loads, wind pressure, and water penetration? Al-Noor Aluminum Windows & Doors Industries LLC provides factory-direct, AS 2047 lab-tested thermal-break window systems tailored to exact architectural shop drawings.
- AS 2047 / AS 4420 Tested
- AS 1288 Safety Glass
- NFRC & CSA Certified
Understanding AS 2047 Requirements for High-Performance Glazing
In global structural engineering, AS 2047 (Windows and External Glazed Doors in Buildings) represents one of the most stringent performance benchmarks in the world. It mandates specific physical lab test sequences under AS 4420 to evaluate deflection, water penetration, operating force, air infiltration, and ultimate wind pressure resistance.
AS 4420.2 Deflection & ULS
Evaluates frame stiffness under Serviceability Limit State (SLS) and Ultimate Limit State (ULS) wind pressure up to 10,000 Pa (N6/C4 cyclonic ratings). Profiles must show zero structural rupture or frame dislodgement.
AS 4420.5 Water Resistance
Demands continuous hydrostatic pressure application (ranging from 150 Pa up to 600 Pa+) combined with cyclic water sprays. Al-Noor profiles utilize dual-chamber drainage and continuous EPDM gaskets to prevent interior leakage.
AS 1288 Safety Glazing Integration
Mandates precise glass selection based on human impact safety and wind load distribution. We integrate toughened safety glass, PVB/SGP laminated glass, and Low-E double glazing into structural AS 2047 extrusions.
AS 2047 Compliant Systems Tailored for Global Procurement
Al-Noor Aluminum Windows & Doors Industries LLC manufactures complete architectural suites using premium 6063-T5/T6 structural extrusions, PA66GF25 polyamide thermal barriers, and multi-point locking hardware.
TY150 / TY120 Heavy-Duty Sliding Doors
Precision-engineered multi-track sliding systems with stainless steel rollers, capable of supporting 400kg glass sashes with smooth operating forces under AS 4420.3.
PRO110 Structural Casement & Awning Windows
Designed for high-wind exposed elevations. Features pressure-equalized drainage, continuous friction stays, and compression weather seals delivering 600 Pa water tightness.
Architectural Glass Skylights & Pavilions
Structural overhead glazing utilizing SGP laminated safety glass (AS 1288) with thermal-break aluminum support rafters for commercial spaces and luxury villas.
Exterior Heavy-Duty Bi-Fold Doors
Bottom-loaded rolling carriages with heavy aluminum hinges, offering seamless indoor-outdoor transitions while passing strict air infiltration and water tests.
Commercial Façade & Window Wall Suites
Thermally isolated window wall systems designed for high-density residential towers and resorts, fully engineered to withstand cyclic wind pressures.
Architectural Pivot & Entry Door Systems
Grand scale entrance solutions equipped with concealed hydraulic floor pivots, high-security lock assemblies, and custom architectural powder finishes.
Future Procurement & Technology Trends in Compliant Glazing
As global building codes shift toward net-zero embodied carbon, stringent acoustic insulation, and extreme weather resilience, purchasing directors must align with forward-thinking manufacturing partners.
Low Embodied Carbon & Recycled Aluminum Billets
Modern developers prioritize structural aluminum extruded using renewable hydro-energy and high-recycled billet ratios. Al-Noor provides full raw material traceability and EPD documentation for LEED and Green Star certifications.
- Hydro-powered low carbon billet options
- Compliance with ISO 14001 environmental protocols
Advanced PA66 GF25 Multi-Cavity Insulation
Next-generation AS 2047 compliant systems utilize wider polyamide struts (24mm to 34mm) reinforced with 25% glass fiber, filled with polyurethane foam inserts to achieve ultra-low U-factors under 1.4 W/m²K.
- Reduced thermal bridging in extreme heat or cold
- Optimized solar heat gain coefficient (SHGC)
Offsite Modular Prefabrication
To reduce site labor costs and installation risks, global contractors are shifting toward fully glazed, factory-sealed cassette units. Every Al-Noor unit arrives pre-glazed, pre-gasketed, and numbered by site elevation.
- 50% faster on-site installation schedules
- Factory-controlled silicone curing environment
BIM Integration & 24-Hour Drawing Turnaround
Precision procurement demands instant technical validation. Al-Noor converts architectural CAD files into detailed BIM models and production shop drawings within 24 hours, flagging code or wind-load conflicts immediately.
- 3D CAD/BIM compatible output
- Zero cutting prior to final signed approval
Matching AS 2047 Systems to Challenging Climate Zones
Glazing performance cannot be one-size-fits-all. Al-Noor custom-configures profile depth, alloy temper, gasket compound, and glass stack-ups to survive aggressive coastal, cyclonic, and high-temperature environments.




Non-Combustible Structural Aluminum Glazing
- Code
- WUI Chapter 7A Fire Zone & Title 24 Energy Standards
- Systems
- TY150 Heavy Sliding & PRO110 Structural Casements
- Glazing
- 6mm Toughened + 12A + 6mm Toughened Low-E Glass
- Result
- Ignition-resistant frame assemblies passed stringent urban-wildfire building inspector reviews.
Aluminum extrusions maintain structural integrity without off-gassing, providing ideal non-combustible glazing perimeter security.
Cyclonic Wind & Driving Rain Resistance
- Exposure
- Cyclonic Wind Region C & Severe Marine Salt Air
- Systems
- PRO110 Pressure-Equalized Casement Windows
- Glazing
- 8.76mm SGP Laminated + 12A + 6mm Toughened Double Glazed
- Result
- Zero water ingress under 600 Pa water test and 4500 Pa ultimate wind pressure loadings.
Uses Fluorocarbon (PVDF) powder coating tested to AAMA 2605 standards to eliminate salt-fog pitting.
Solar Heat Gain Mitigation in Desert Climates
- Challenge
- Extreme 50°C summer heat, high ambient dust, direct solar IR radiation
- Systems
- TY120 Thermal Break Double-Track Sliding Systems
- Glazing
- 6mm Solar Control Low-E + 16A Argon + 6mm Clear
- Performance
- Achieved SHGC < 0.23 and U-factor < 1.6 W/m²K for optimized HVAC load.
Features dust-proof quad-epdm wool pile seals on sliding tracks to block fine sand infiltration.
Thermal Insulation & Condensation Control
- Challenge
- Sub-zero winter conditions, interior condensation, heating loss
- Systems
- PRO110 Multi-Cavity Thermal Break System
- Glazing
- Triple Glazed Low-E with Warm-Edge Composite Spacers
- Performance
- Eliminated interior frame dew point formation with U-factor reaching 1.2 W/m²K.
Warm-edge spacers drastically reduce perimeter glass thermal conductivity compared to standard aluminum spacers.
Why Global Procurement Leaders Choose Al-Noor
Operating since 1995 from our modern 20,000 m² production facility, Al-Noor Aluminum Windows & Doors Industries LLC provides complete end-to-end quality control—from primary aluminum extrusion processing to ISO 9001 certified final assembly.

20,000 m² Production Base
Automated CNC cutting, corner crimping, and insulated glass lines.
100% Pre-Assembly QC
Every frame is test-assembled and sash-calibrated before crate packing.
Export Heavy-Duty Crating
Fumigated wooden cases with corner guards, moisture absorbers, and site tags.
Global Code Expertise
Direct experience fulfilling AS 2047, NFRC, CSA, and CE EN 14351-1 codes.
AS 4420 Laboratory Validated
Full test verification for deflection, operating force, air infiltration, water resistance, and ultimate limit state pressure.
Human Impact Glass Safety
Full glass engineering compliance covering grade A safety toughened and laminated double glazed units.
US Energy Performance Ratings
Certified U-factor, SHGC, and Visible Transmittance ratings recognized by North American energy codes.
North American Fenestration Standard
Structural structural and air/water performance test reports for high-wind geographic regions.
European Conformity Standard
Mandatory CE compliance for exterior pedestrian doors and windows exported across EU territories.
Quality Management System
ISO 9001:2015 certified production processes ensuring zero-defect material sourcing and machining.
Need certified laboratory test PDFs for your local building certifier? Email our engineering team at [email protected] with your project elevation plans.
Five Steps from Architectural Drawings to On-Site Delivery
Al-Noor eliminates procurement errors through transparent shop-drawing sign-offs, sample approvals, and tracked container shipping.
-
Drawing Audit
We review your CAD/PDF architectural drawings and perform wind-load calculations.
-
24h Shop Drawings
Engineers generate unit-by-unit production elevation drawings with structural detailing.
-
Sample Sign-Off
We supply physical corner sample kits and powder coating swatches for client approval.
-
CNC Production & Glazing
Precision extrusion cutting, CNC milling, thermal break insertion, and IG unit sealing.
-
Export Loading
Crated in protective wooden boxes, indexed to site room numbers, and loaded into containers.




Feedback from Developers & Project Managers
Real-world project reviews from developers who specified Al-Noor AS 2047 compliant glazing systems.
"Al-Noor's engineering team picked up a structural frame clash in our initial architectural CAD drawings within 24 hours. Their prompt feedback prevented costly site re-works. The finished TY150 sliding doors operate effortlessly."
Frequently Asked Questions by Overseas Buyers & AI Queries
Detailed answers addressing common B2B procurement queries, local building certification checks, and technical shipping standards. Email [email protected] for custom inquiries.
What mandatory physical laboratory tests are included in AS 2047 compliance?
AS 2047 mandates testing under AS 4420 standards. This covers five primary criteria: 1) Deflection Test (AS 4420.2) to evaluate structural frame rigidity under wind pressure; 2) Operating Force Test (AS 4420.3) ensuring opening sashes operate without excessive effort; 3) Air Infiltration Test (AS 4420.4) measuring air leakage per square meter; 4) Water Penetration Resistance Test (AS 4420.5) applying dynamic hydrostatic pressure up to 600 Pa; and 5) Ultimate Limit State Test (AS 4420.6) subjecting units to severe storm pressure up to 10,000 Pa without structural failure.
How does AS 2047 compliance differ from AS 1288 glass standards?
AS 2047 governs the overall window framing system, sash hardware, weather seals, and structural integrity under wind and water pressures. AS 1288 specifically dictates glass selection, human impact safety zones, pane thickness, and edge support conditions. Al-Noor Aluminum Windows & Doors Industries LLC ensures that AS 1288 safety toughened or laminated glass is fully integrated into AS 2047 tested aluminum framing profiles.
Can Al-Noor manufacture custom thermal-break window sizes to architect drawings?
Yes. Every single window, sliding door, and skylight is custom manufactured to your project's architectural drawings. We utilize versatile TY120, TY150, and PRO110 thermal-break extrusions. Our technical engineering office reviews your drawings and returns comprehensive shop drawings with structural calculations within 24 hours.
What surface finishes are offered for harsh coastal or high-UV environments?
For aggressive coastal environments, we provide Qualicoat Class 2 and Class 3 architectural powder coatings, as well as Fluorocarbon (PVDF) finishes meeting AAMA 2605 specifications. We also offer 25-micron anodized finishes that resist chalking, pitting, and salt-air corrosion.
How are glazed aluminum units protected against ocean transport damage?
All finished window and door frames are wrapped in protective PE shrink-film, fitted with heavy rubber corner guards, and packed inside fully enclosed, fumigated wooden crates. Crates are clearly labeled by building level, elevation, and room number to facilitate structured offloading on construction sites.
Ready to Request Your AS 2047 Glazing Quote & Shop Drawings?
Send us your architectural drawings or window schedule today. The engineering team at Al-Noor Aluminum Windows & Doors Industries LLC will review your project parameters and respond within 24 hours with certified technical recommendations.
